Jophil Thomas, Irshad A, Sathu T, Vasudevan VN, Harikrishnan S, Kavitha Rajagopal
Pages: 31-37 | 102 Views 48 Downloads
Keywords: Meat-based snacks, Foxtail millet, Chicken meat biscuits, Value addition, Dietary fibre, Storage study, TBARS, Tyrosine value, Yeast and mould count, Sensory evaluation
Poultry meat is one of the most widely consumed sources of animal protein in India, valued for its affordability, nutritional benefits and broad cultural acceptance. With no significant religious restrictions, it forms an essential part of diets across various communities. In 2023, poultry meat production reached 4.995 million tonnes, contributing 51.14% of the country’s total meat output, indicating a steady rise in demand. Among poultry products, broiler meat is particularly preferred due to its high protein content, low fat levels and ease of digestion. Biscuits are among the most popular ready-to-eat snacks globally, known for their convenience and versatility in incorporating nutritious ingredients, making them suitable for a diverse consumer base (Borooah et al., 2024) [1]. Incorporating poultry meat into biscuits presents an opportunity to enhance their protein content, but since meat lacks dietary fibre, fortification with fibre-rich ingredients is essential. Bijlwan et al. (2019) [2] suggested that coarse grains and legumes such as whole wheat, rice, oats, maize, black gram, buckwheat, barley, rye, finger millet, pearl millet, sorghum and chickpeas could be used in bakery products to improve their protein and fibre content. Similarly, Liu et al. (2011) [3] noted that incorporating millet grains into processed meat products could help meet dietary fibre requirements.
Millets, recognised for their rich nutrient composition and health benefits, have gained global attention, leading to the UN declaring 2023 as the International Year of Millets. Their gluten-free nature, high fibre content and low glycaemic index make them an excellent functional ingredient for health-conscious consumers. Singh et al. (2014) [4] observed that the demand for shelf-stable meat-based snacks has risen due to urbanisation and changing food habits. Compared to commonly consumed high-energy snacks like potato chips and crackers, meat-based snacks have been found to contain lower total fat and higher protein and ash content (Cakmak et al., 2016) [5].
The incorporation of millets into chicken meat biscuits offered a promising approach to developing a balanced, protein-rich and fibre-enhanced snack. This study examined the formulation and development of chicken meat biscuits enriched with millets to improve their nutritional profile and align with modern health trends.
Broiler chickens weighing between 2 and 2.5 kg were procured from the local market and slaughtered hygienically following scientific protocols at the Meat Technology Unit in Mannuthy. After processing, the chickens were dressed, sealed in high-density polyethylene bags and stored under aerobic conditions in a freezer at -21 ± 1 °C until they were used for experimentation.
The frozen, dressed chickens were gradually thawed overnight at 4 ± 1 °C. After thawing, the meat was manually deboned, with any visible fat, fascia and loose connective tissue carefully removed. It was then cut into small pieces, boiled and minced. The minced meat was dried in a cabinet tray dryer with a blower set at 60 °C for 3 to 4 hours. Once dried, it was finely ground into a powder using a grinder, packed in low-density polyethylene bags and stored at 4 ± 1 °C.
Refined wheat flour (RWF) constituted 65 percent of the formulation, while chicken meat powder (CMP) made up 35 percent, bringing the total to 100 percent. Refined wheat flour was replaced by millet flour in the treatment samples. In addition to these, other ingredients were included as follows: butter at 33 percent, sugar at 26 percent, salt at 1 percent, spice mix at 1 percent, baking powder at 0.6 percent, Symega chicken flavour at 0.4 percent and one whole egg.
The ingredients listed were measured according to the specified quantities, following the method described by Kumar et al. (2016) [6]. Refined wheat flour (RWF), chicken meat powder (CMP), sugar and salt were first combined in a planetary mixer. Butter, eggs and baking powder were then added and thoroughly mixed. Finally, the spice mix and chicken flavour were incorporated and the mixture was blended until all ingredients were evenly distributed.
Initially, the formulation for chicken meat biscuits was standardised. Subsequently, finger millet (ragi), pearl millet (bajra) and foxtail millet (thinna) were incorporated by replacing 30%, 40% and 30% of RWF. The dough was then shaped into biscuits and baked at 180 °C for 20-25 minutes. After baking, the biscuits were cooled to room temperature, packaged in laminated pouches and stored at ambient temperature. The millet-enriched biscuits and control were evaluated for their proximate composition and cooking yield on the day of preparation, then sensory and microbiological qualities on the 0th, 15th, 30th, 45th day and 60th day of storage period.
The weight of raw and baked biscuits of each replicate was recorded and product yield was expressed as percentage by using following formula:
Millet-incorporated chicken meat biscuits, along with control samples, were assessed for their proximate composition including moisture content (determined by oven drying), protein content (measured using the Kjeldahl distillation method), fat content (analysed through the Soxhlet method) and ash content (assessed using a muffle furnace), following the standard procedures outlined by AOAC (2016) [7].
Control and treatment biscuits were analysed for dietary fibre content according to AOAC (2016) [7].
Thio-Barbituric Acid Reactive Substances (TBARS) value of biscuits was determined by the extraction method of Witte et al. (1970) [8]. TBARS estimation can be accomplished by measuring the concentration of secondary lipid oxidised products like malonaldehyde. Twenty grams of the sample was added with 50 mL of chilled extracting solution containing twenty per cent trichloroacetic acid in two molar orthophosphoric acid and was homogenised for about 1.5 to 2 minutes. The resultant slurry was transferred to a 100 mL volumetric flask and made up to 100 mL with deionised distilled water and this solution was filtered through Whatman No.1 filter paper. The filtrate was termed as Tri-Chloro Acetic acid (TCA) extract and five mL of TCA extract was mixed with five mL of 2-thiobarbituric acid solution (0.005 M in distilled water). Blank was constituted with five mL distilled water and 2-thiobarbituric acid solution. The constituted samples along with blank in tightly closed test tubes were placed in a boiling water bath (100℃) for 30 minutes and this was cooled for ten minutes under cold running water. The developed colour was measured as absorbance value at 530 nanometers (Double Beam Spectrophotometer Systronics-India, AU-2703) and expressed as thio-barbituric acid number. TBARS value was expressed as mg malonaldehyde per kg of the sample.
Tyrosine Value (TV) of the samples was estimated as per the method followed by Strange et al. (1977) [9]. Tyrosine is the first produced amino acid during proteolysis. Hence, tyrosine readings are indications of meat and meat products proteolysis. Two grams of sample were weighed and 40 mL of five per cent TCA solution was added. After homogenisation for two minutes the sample was filtered and the filtrate was collected. The filtrate, termed TCA extract was used in the estimation of TV. To 2.5 mL of TCA extract, equal quantity of distilled water was added in a test tube and shaken with ten mL of 0.5 N sodium hydroxide (NaOH) and three mL of diluted Folin and Ciocalteu’s phenol (FC) reagent (one mL of concentrated FC reagent and two mL of distilled water). After mixing, the contents were allowed to stand for 15 minutes at room temperature, the optical density was measured at 660 nanometers in (Double Beam Spectrophotometer Systronics-India, AU-2703) using a blank containing 2.5 mL of five per cent TCA, equal quantity of distilled water was added in a test tube and shaken with 10 mL of 0.5 N NaOH and three mL of diluted FC reagent for comparison. TV was analysed and expressed as mg/100g of sample.
For the estimation of Total Viable Count (TVC) and yeast and mould count in biscuits, the samples were homogenised with peptone water in a Stomacher (Seward Stomacher 400 Circulator).
Total viable count of aerobic bacteria of each sample was estimated by pour plate method, as described by Morton (2001) [10] using Standard Plate Count Agar (HiMedia, Mumbai) and incubated at 37 °C for 18 to 24 h and the count expressed as log10 CFU/g.
Method described by Beuchat et al. (2001) [11] was followed for the estimation of yeast and mould count per g of the sample. Saburaud’s Dextrose Agar (HiMedia, Mumbai) was used. The plates were incubated at 25-27 °C for three days and the count expressed as log10 CFU/g.
Sensory evaluation was conducted by a semi-trained panel of seven members from the Department of Livestock Products Technology, College of Veterinary and Animal Sciences, Mannuthy, Thrissur. An eight-point Hedonic scorecard was used. The chicken biscuits were assessed for colour and appearance, meat flavor intensity, crispiness, aftertaste and overall acceptability. Uniform samples of millet-incorporated chicken biscuits, labeled with three-digit codes, were provided to the panelists, who rated them using the Hedonic scale. Plain water was provided to rinse their mouths between samples and the average of individual scores was recorded for each attribute.
All the experiments were replicated six times. The data obtained from product yield, proximate composition, microbiological and sensory characteristics of the control as well as treatment chicken biscuits were assessed statistically by repeated measures ANOVA, one-way ANOVA and Kruskal Wallis test using the Statistical Package for Social Sciences (SPSS) software 24.0 version (Snedecor et al., 1994) [12].
Participation in the sensory evaluation was voluntary, conducted under ethical guidelines and posed no risk or harm to participants. Therefore, no human rights violations occurred during the conduct of research.
The product yield of the control and treatment biscuits, as shown in Table I, exhibited significant differences (p < 0.01). The highest yield was observed in finger millet-incorporated biscuits (91.18 ± 0.14), which can be attributed to the excellent gelation properties and fibre content of finger millet. These characteristics enhance binding and moisture retention, thereby improving the overall product yield (Saha et al., 2011) [13]. In contrast, the control biscuits had the lowest yield (82.72 ± 0.32), likely due to the absence of fibre.
The proximate composition of the control and treatment biscuits given in Table I, was analysed for moisture, crude protein, ether extract, total ash and dietary fibre content. The treatment biscuits had the lowest moisture content, showing a significant difference (p < 0.05) compared to the control. This decrease in moisture may be due to the higher concentration of refined flour in the control, which has a greater ability to retain moisture (Anil et al., 2023) [14].
Significant differences (p < 0.01) in crude protein content were observed between the control and treatment biscuits. The highest protein content (30.27 ± 0.07%) was recorded in foxtail millet-incorporated biscuits, likely due to the naturally higher protein content of millet flour compared to the refined wheat flour (RWF) used in the control. Sharma et al. (2017) [15] reported that foxtail millet had crude protein ranging from 11.85 to 20.58 g/100 g and amino acids from 0.25 to 4.31 g/100 g, emphasising its distinct health benefits over other cereals.
The ether extract content of pearl millet-incorporated biscuits showed a significant difference (p < 0.05) compared to the other samples. This variation may be due to the relatively higher fat content in pearl millet, as reported by Gopalan et al. (2004) [16], who documented fat contents of 1.92 g, 5.43 g and 4.3 g in finger millet, pearl millet and foxtail millet, respectively. Significant differences (p < 0.01) in total ash content were observed between the control and treatment biscuits. The higher ash content in finger millet-incorporated biscuits may be attributed to the naturally high mineral content of finger millet. This is supported by Thompson (1993) [17], who reported that finger millet contains 344 mg of calcium per 100 g, along with 0.48 g of phytates and 0.61% polyphenols and tannins, all of which contribute to the total ash content.
| Parameters | Control | Finger millet | Pearl millet | Foxtail millet | F value (p value) |
|---|---|---|---|---|---|
| Yield (%) | 82.72 ± 0.32a | 91.18 ± 0.14d | 90.27 ± 0.15c | 89.09 ± 0.33b | 224.3 (< 0.001)** |
| Moisture (%) | 8.51 ± 0.70b | 7.06 ± 0.83ab | 7.05 ± 0.72ab | 6.36 ± 0.20a | 4.772 (0.041)* |
| Crude Protein (%) | 28.89 ± 0.26c | 25.15 ± 0.16a | 27.21 ± 0.06b | 30.27 ± 0.07d | 180.573 (< 0.001)** |
| Ether extract (%) | 24.71 ± 0.84a | 25.63 ± 0.16a | 27.28 ± 0.29b | 25.5 ± 0.19a | 5.348 (0.007)** |
| Total Ash (%) | 2.49 ± 0.06c | 2.63 ± 0.01d | 2.31 ± 0.01b | 1.94 ± 0.007a | 72.299 (< 0.001)** |
| Dietary fibre (g/100g) | 1.01 ± 0.07a | 2.05 ± 0.02b | 2.88 ± 0.03c | 3.51 ± 0.01d | 346.763 (< 0.001)** |
* Significant at 0.05 level; ** Significant at 0.01 level; Means with different superscripts in rows differ significantly. The values are expressed as their Mean ± Standard error.
The dietary fibre content given in Table I, differed significantly (p < 0.01) across all samples, with foxtail millet-incorporated biscuits showing the highest value (3.51 ± 0.01%), while the control had the lowest (1.65 ± 0.07%). This trend is consistent with the findings of Elleuch et al. (2011) [18], who reported that foxtail millet contains a substantially higher dietary fibre content (60.69 g/100 g) compared to other brans, such as rice bran (27.04%) and wheat bran (44.46%). The incorporation of millet contributed to the increased fibre content in these formulations. The higher fibre content not only enhances the biscuits' nutritional profile but also provides functional benefits, as highlighted by Kausar et al. (2019) [19], who found that fibre-enriched meat products exhibit superior functional properties.
As per FSSAI (2018) [20] guidelines, a food product must contain between 3 to 6g of dietary fibre per 100g to be classified as a good source of fibre. Based on this criterion, foxtail millet-incorporated biscuits, with their higher fibre content, can be considered the most nutritionally beneficial among the treatment samples.
The thio-barbituric acid reactive substances (TBARS) values as represented in figure 1, which indicate oxidative rancidity, increased significantly (p < 0.01) over the 60-day storage period in both the control and treatment biscuits. In the control, the TBARS value rose from 0.136 ± 0.012 to 0.559 ± 0.016 mg of malonaldehyde/kg, while a similar trend was observed in the pearl millet-incorporated biscuits, where values increased from 0.206 ± 0.012 to 0.566 ± 0.016 mg of malonaldehyde/kg. These results are consistent with the findings of Ratanatriwong et al. (2011) [21], who reported a gradual rise in TBARS values in fish and chicken snacks stored at ambient temperature. Similarly, Dykes et al. (2006) [22] highlighted the susceptibility of pearl millet-based products to oxidation due to their high polyunsaturated fatty acid content. Furthermore, Kumar et al. (2016) [6] demonstrated that TBARS values in bran-enriched meat biscuits remained below the 2 mg/kg threshold even after 180 days of storage.


The tyrosine value (TV) shown in the figure 2, a measure of proteolytic activity, increased significantly (p < 0.01) in both the control and treatment biscuits over the 60-day storage period. In the control biscuits, the TV rose from 3.15 ± 0.08 to 8.39 ± 0.01 mg tyrosine/100g, likely due to proteolytic changes in meat proteins caused by endogenous enzymes and bacterial proteases, as reported by Balaji (2024) [23]. This trend aligns with the findings of Pavan et al. (2019) [24], who observed an increase in tyrosine levels in finger millet-incorporated nuggets during storage. The rise in proteolysis may be linked to the enhanced availability of amino acids from finger millet, which facilitates greater protein breakdown. Interestingly, the foxtail millet-incorporated biscuits exhibited a lower tyrosine value than the control, despite their higher protein content. Bachate et al. (2022) [25] highlighted the superior biological value of foxtail millet protein, which contains seven of the eight essential amino acids, potentially influencing tyrosine release or retention during storage. These findings suggest that the unique amino acid composition of millet may play a role in regulating proteolytic activity.
The total viable count (TVC) of all samples as given in figure 3, increased significantly (p < 0.01) over the storage period. The initially low TVC across all samples can be attributed to thermal processing, low moisture content and strict hygiene practices maintained during production, as noted by Grohs et al. (2000) [26]. A similar trend was reported by Berwal et al. (2013) [27], who observed a gradual rise in TVC from day 0 to day 30 in both control and chicken-incorporated biscuits, with peak values recorded on day 75. Despite this increase, the TVC values in the present study remained within the acceptable limits for cooked meat products, as established by Jay (1996) [28].


The yeast and mold count depicted in figure 4, remained undetectable until day 30 in all samples, likely due to the low moisture content, pH and the presence of antimicrobial ingredients such as spices, which inhibited microbial growth. However, from day 45 onward, a significant (p < 0.01) increase in yeast and mold count was observed, though the values remained relatively low (ranging from 0.25 to 1.06 log10 CFU/g) by day 60. These findings align with those of Berwal et al. (2013) [27], who reported similar trends in chicken biscuits and cookies and Sarkar et al. (2020) [29], who attributed the absence of yeast and mold growth in traditional bhujia formulations to their reduced moisture content.
| Sample | 0th day | 15th day | 30th day | 45th day | 60th day | ᵡ2 value (p-value) |
|---|---|---|---|---|---|---|
| Appearance and colour | ||||||
| Control | 7.35 ± 0.08 | 7.33 ± 0.08 | 7.33 ± 0.11 | 7.33 ± 0.09 | 7.31 ± 0.11 | 0.655 (0.957)ns |
| Finger millet | 7.06 ± 0.09 | 7.06 ± 0.11 | 7.06 ± 0.13 | 7.06 ± 0.09 | 7.04 ± 0.11 | 1.186 (0.880)ns |
| Pearl millet | 7.21 ± 0.12 | 7.19 ± 0.09 | 7.18 ± 0.14 | 7.17 ± 0.08 | 7.16 ± 0.12 | 0.372 (0.985)ns |
| Foxtail millet | 7.32 ± 0.10 | 7.32 ± 0.05 | 7.29 ± 0.10 | 7.29 ± 0.07 | 7.29 ± 0.10 | 1.571 (0.814)ns |
| (p-value) | (0.176)ns | (0.105)ns | (0.530)ns | (0.104)ns | (0.234)ns | |
| Meat flavour intensity | ||||||
| Control | 6.56 ± 0.10 | 6.54 ± 0.09 | 6.54 ± 0.09 | 6.54 ± 0.07 | 6.52 ± 0.09 | 0.211 (0.995)ns |
| Finger millet | 6.56 ± 0.10 | 6.54 ± 0.07 | 6.52 ± 0.10 | 6.52 ± 0.13 | 6.52 ± 0.10 | 0.369 (0.985)ns |
| Pearl millet | 6.56 ± 0.11 | 6.54 ± 0.07 | 6.52 ± 0.09 | 6.52 ± 0.10 | 6.52 ± 0.09 | 0.183 (0.996)ns |
| Foxtail millet | 6.55 ± 0.10 | 6.54 ± 0.09 | 6.53 ± 0.10 | 6.52 ± 0.10 | 6.52 ± 0.10 | 0.149 (0.997)ns |
| (p-value) | (0.999)ns | (0.998)ns | (0.999)ns | (0.964)ns | (0.999)ns | |
| Crispiness | ||||||
| Control | 7.29 ± 0.12 | 7.29 ± 0.12 | 7.27 ± 0.12 | 7.27 ± 0.09 | 7.27 ± 0.10 | 0.052 (1.00)ns |
| Finger millet | 7.37 ± 0.14 | 7.37 ± 0.12 | 7.36 ± 0.07 | 7.36 ± 0.08 | 7.35 ± 0.09 | 1.347 (0.853)ns |
| Pearl millet | 7.34 ± 0.13 | 7.34 ± 0.11 | 7.34 ± 0.12 | 7.33 ± 0.11 | 7.33 ± 0.14 | 0.177 (0.996)ns |
| Foxtail millet | 7.33 ± 0.12 | 7.32 ± 0.12 | 7.31 ± 0.13 | 7.31 ± 0.10 | 7.31 ± 0.09 | 0.230 (0.994)ns |
| (p-value) | (0.907)ns | (0.946)ns | (0.896)ns | (0.788)ns | (0.838)ns | |
| After taste | ||||||
| Control | 7.14 ± 0.13 | 7.14 ± 0.11 | 7.13 ± 0.12 | 7.12 ± 0.08 | 7.12 ± 0.11 | 0.535 (0.970)ns |
| Finger millet | 7.21 ± 0.08 | 7.21 ± 0.07 | 7.21 ± 0.09 | 7.20 ± 0.06 | 7.18 ± 0.07 | 0.538 (0.970)ns |
| Pearl millet | 7.27 ± 0.14 | 7.26 ± 0.09 | 7.26 ± 0.08 | 7.25 ± 0.09 | 7.25 ± 0.10 | 1.353 (0.852)ns |
| Foxtail millet | 7.33 ± 0.14 | 7.31 ± 0.11 | 7.31 ± 0.13 | 7.31 ± 0.12 | 7.31 ± 0.10 | 0.496 (0.974)ns |
| (p-value) | (0.547)ns | (0.690)ns | (0.719)ns | (0.316)ns | (0.334)ns | |
| Overall acceptability | ||||||
| Control | 7.21 ± 0.11 | 7.21 ± 0.13 | 7.2 ± 0.09 | 7.19 ± 0.06 | 7.19 ± 0.13 | 0.673 (0.955)ns |
| Finger millet | 7.23 ± 0.13 | 7.23 ± 0.10 | 7.22 ± 0.08 | 7.21 ± 0.08 | 7.20 ± 0.10 | 1.122 (0.891)ns |
| Pearl millet | 7.29 ± 0.14 | 7.27 ± 0.10 | 7.27 ± 0.09 | 7.26 ± 0.10 | 7.26 ± 0.13 | 2.583 (0.630)ns |
| Foxtail millet | 7.35 ± 0.12 | 7.35 ± 0.09 | 7.33 ± 0.09 | 7.33 ± 0.10 | 7.32 ± 0.07 | 0.798 (0.939)ns |
| (p-value) | (0.754)ns | (0.824)ns | (0.766)ns | (0.680)ns | (0.871)ns | |
ns – non-significant at 0.05 level. The values are expressed as their Mean ± Standard error.
The results of the sensory analysis for both the control and treatment samples, conducted on days 0, 15, 30, 45 and 60 of storage, are presented in Table II. The evaluation showed no significant (p > 0.05) changes in appearance and colour, meat flavor intensity, crispiness, aftertaste or overall acceptability throughout the storage period. This suggests that adding millet did not have an adverse effect on the sensory characteristics of the biscuits. The control biscuits consistently received the highest scores for appearance and colour across storage, which aligns with the findings of Kumar et al. (2016) [6]. However, the foxtail millet-incorporated biscuits maintained the highest overall acceptability throughout the storage period, highlighting the potential of millet-based biscuits to retain consumer preference over extended storage durations.
Incorporating millets into chicken meat biscuits enhances their protein content and provides a valuable source of dietary fibre, resulting in a well-accepted product. Biscuits formulated with 30% finger millet, 40% pearl millet and 30% foxtail millet had protein levels of 25.15%, 27.2% and 30.27%, respectively. Additionally, their dietary fibre content was 2.05g, 2.88g and 3.51g per 100g, compared to the control sample, which contained 28.89% protein and 1.01g of dietary fibre per 100g. The incorporation of millet flour not only increased the yield but also potentially extending the product’s shelf life. Furthermore, chicken meat biscuits made with finger, pearl and foxtail millet can be stored at room temperature for up to 60 days without significant sensory deterioration or microbial spoilage.
The authors declare that they have no conflict of interest.
The authors declare that they have no financial interests that are directly or indirectly related to the work submitted for publication.
This study didn’t receive any funding.
No additional data are available beyond those presented in the submitted manuscript.
All authors contributed to the study conception and design. Material preparation, data collection and analysis were performed by Jophil Thomas, Irshad A, Sathu T, Vasudevan V N, Harikrishnan S and Kavitha Rajagopal. The first draft of the manuscript was written by Jophil Thomas and all other authors commented on previous versions of the manuscript. All authors read and approved the final manuscript.